Orange PI. Ethernet only lights. No response

liriusz · Published in 2015-11-4 23:31:57

Edited by liriusz at 2015-11-6 09:52

Hi guys, i have problem with my Orange PI. When i plug into electricity, only response is LED from Ethernet PORT. They only still shine, even not blink ;(
Sorry for my bad english and i hope to help me with this device. ;)

Hamset · Published in 2015-11-5 12:52:51

I have the same problem.

3 units with the same problem

HW_Tech · Published in 2015-11-5 13:37:21

And I have the same problem.
I tried to run the unit with an installed SD-Card (Lubuntu_For_BananaPi_v3.1.1.tgz, Raspbian_For_OrangePi_v1_0.img.xz, 2015-05-05-raspbian-wheezy.zip), and without SD-card. In all cases, the apparatus behaves equally OrangePi_PC.

jacer · Published in 2015-11-12 08:08:47

HW_Tech replied at 2015-11-5 13:37
And I have the same problem.
I tried to run the unit with an installed SD-Card (Lubuntu_For_BananaPi ...

You simply downloaded the wrong image if you are using OPI-PC. Try this one below.\http://www.orangepi.org/orangepi ... &extra=page%3D1