|
Hello,
I've purchased 2 Orange PI Zero boards. I've attempted to boot multiple Linux distros on both boards.
The boards are being monitored with thier serial ports with Putty. I have a cable to Ethernet as well (not working)
The listing below is what I see with both boards trying to boot the same O/S.
No Ethernet connection is made by both boards.
Any help would be greatly appreciated.
Trying to boot from MMC1
U-Boot 2017.01-armbian (Feb 02 2017 - 03:04:34 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Zero
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot: 0
6944 bytes read in 147 ms (45.9 KiB/s)
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2652 bytes read in 181 ms (13.7 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
123 bytes read in 124 ms (0 Bytes/s)
3790004 bytes read in 540 ms (6.7 MiB/s)
4754648 bytes read in 628 ms (7.2 MiB/s)
** File not found /boot/.next **
** File not found .next **
35384 bytes read in 492 ms (69.3 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 3789940 Bytes = 3.6 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Using machid 0x1029 from environment
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 512MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid [0x2c00042!
ion_reserve_common: ion reserve: [0x57e00000, 0x60000000]!
Loading, please wait...
|
|