please choosego to mobile | Continue to access the PC version
1234
Return to list Post new posts
Author: igorpec

Orange PI with 4.2.2 and 3.4.109

[Copy link]

1

threads

12

posts

73

credits

Registered member

Rank: 2

credits
73
Published in 2015-10-17 23:43:24 | Show all floors
And got to this point now:

  1. Uncompressing Linux... done, booting the kernel.
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Initializing cgroup subsys cpuacct
  5. [    0.000000] Linux version 4.3.0-rc5 (root@kernel) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-11ubuntu1) ) #20 SMP PREEMPT Sat Oct 17 09:04:41 EDT 2015
  6. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  7. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [    0.000000] Machine model: Xunlong Orange Pi PC
  9. [    0.000000] bootconsole [earlycon0] enabled
  10. [    0.000000] Memory policy: Data cache writealloc
  11. [    0.000000] On node 0 totalpages: 524288
  12. [    0.000000] free_area_init_node: node 0, pgdat c121b840, node_mem_map ee7f8000
  13. [    0.000000]   Normal zone: 1520 pages used for memmap
  14. [    0.000000]   Normal zone: 0 pages reserved
  15. [    0.000000]   Normal zone: 194560 pages, LIFO batch:31
  16. [    0.000000]   HighMem zone: 329728 pages, LIFO batch:31
  17. [    0.000000] PERCPU: Embedded 13 pages/cpu @ee7b1000 s23232 r8192 d21824 u53248
  18. [    0.000000] pcpu-alloc: s23232 r8192 d21824 u53248 alloc=13*4096
  19. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
  21. [    0.000000] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 loglevel=8 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1920x1080p60 root=/dev/mmcblk0p2
  22. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [    0.000000] Memory: 2060408K/2097152K available (9011K kernel code, 560K rwdata, 2616K rodata, 6372K init, 665K bss, 36744K reserved, 0K cma-reserved, 1318912K highmem)
  26. [    0.000000] Virtual kernel memory layout:
  27. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  28. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  29. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  30. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  31. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  32. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  33. [    0.000000]       .text : 0xc0008000 - 0xc0b62ec0   (11628 kB)
  34. [    0.000000]       .init : 0xc0b63000 - 0xc119c000   (6372 kB)
  35. [    0.000000]       .data : 0xc119c000 - 0xc1228084   ( 561 kB)
  36. [    0.000000]        .bss : 0xc122b000 - 0xc12d15ec   ( 666 kB)
  37. [    0.000000] Preemptible hierarchical RCU implementation.
  38. [    0.000000]         Build-time adjustment of leaf fanout to 32.
  39. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  40. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  41. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  42. [    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  43. [    0.008084] Switching to timer-based delay loop, resolution 41ns
  44. [    0.014296] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  45. [    0.023858] Console: colour dummy device 80x30
  46. [    0.028395] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  47. [    0.038844] pid_max: default: 32768 minimum: 301
  48. [    0.043776] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [    0.050487] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [    0.058226] Initializing cgroup subsys freezer
  51. [    0.062800] CPU: Testing write buffer coherency: ok
  52. [    0.067790] ftrace: allocating 30562 entries in 90 pages
  53. [    0.115635] CPU0: update cpu_capacity 1024
  54. [    0.119821] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  55. [    0.125651] Setting up static identity map for 0x400082c0 - 0x40008318
  56. [    0.275911] Brought up 1 CPUs
  57. [    0.278969] SMP: Total of 1 processors activated (48.00 BogoMIPS).
  58. [    0.285222] CPU: All CPU(s) started in SVC mode.
  59. [    0.290480] devtmpfs: initialized
  60. [    0.300265] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  61. [    0.308341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  62. [    0.328388] xor: measuring software checksum speed
  63. [    0.428383]    arm4regs  :  1522.400 MB/sec
  64. [    0.528429]    8regs     :   902.000 MB/sec
  65. [    0.628493]    32regs    :  1114.400 MB/sec
  66. [    0.632755] xor: using function: arm4regs (1522.400 MB/sec)
  67. [    0.638422] pinctrl core: initialized pinctrl subsystem
  68. [    0.644194] NET: Registered protocol family 16
  69. [    0.649105] DMA: preallocated 256 KiB pool for atomic coherent allocations
  70. [    0.658713] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  71. [    0.666822] hw-breakpoint: maximum watchpoint size is 8 bytes.

  72. ....

  73. [    2.747623] [drm] Initialized drm 1.1.0 20060810
  74. [    2.838163] loop: module loaded
  75. [    2.841752] tun: Universal TUN/TAP device driver, 1.6
  76. [    2.846882] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  77. [    2.853346] PPP generic driver version 2.4.2
  78. [    2.857854] PPP BSD Compression module registered
  79. [    2.862687] PPP Deflate Compression module registered
  80. [    2.867833] PPP MPPE Compression module registered
  81. [    2.872746] NET: Registered protocol family 24
  82. [    2.877297] PPTP driver version 0.8.5
  83. [    2.881283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  84. [    2.887891] ehci-platform: EHCI generic platform driver
  85. [    2.893316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  86. [    2.899662] usbcore: registered new interface driver usb-storage
  87. [    2.905833] usbcore: registered new interface driver ums-alauda
  88. [    2.911903] usbcore: registered new interface driver ums-cypress
  89. [    2.918029] usbcore: registered new interface driver ums-datafab
  90. [    2.924184] usbcore: registered new interface driver ums_eneub6250
  91. [    2.930493] usbcore: registered new interface driver ums-freecom
  92. [    2.936612] usbcore: registered new interface driver ums-isd200
  93. [    2.942660] usbcore: registered new interface driver ums-jumpshot
  94. [    2.948866] usbcore: registered new interface driver ums-karma
  95. [    2.954826] usbcore: registered new interface driver ums-onetouch
  96. [    2.961060] usbcore: registered new interface driver ums-realtek
  97. [    2.967178] usbcore: registered new interface driver ums-sddr09
  98. [    2.973226] usbcore: registered new interface driver ums-sddr55
  99. [    2.979258] usbcore: registered new interface driver ums-usbat
  100. [    2.985282] usbcore: registered new interface driver usbserial
  101. [    2.991249] usbcore: registered new interface driver option
  102. [    2.996931] usbserial: USB Serial support registered for GSM modem (1-port)
  103. [    3.004306] mousedev: PS/2 mouse device common for all mice
  104. [    3.010237] i2c /dev entries driver
  105. [    3.014112] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
  106. [    3.022592] Bluetooth: HCI UART driver ver 2.3
  107. [    3.027258] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/mmc0@0, deferring probe
  108. [    3.038518] hidraw: raw HID events driver (C) Jiri Kosina
  109. [    3.046013] usbcore: registered new interface driver usbhid
  110. [    3.051715] usbhid: USB HID core driver
  111. [    3.055702] usbcore: registered new interface driver r8712u
  112. [    3.061449] usbcore: registered new interface driver r8188eu
  113. [    3.067230] Mali: Mali device driver loaded
  114. [    3.072509] oprofile: no performance counters
  115. [    3.077038] oprofile: using timer interrupt.
  116. [    3.081567] u32 classifier
  117. [    3.084356]     Actions configured
  118. [    3.087844] Netfilter messages via NETLINK v0.30.
  119. [    3.092718] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  120. [    3.099255] ctnetlink v0.93: registering with nfnetlink.
  121. [    3.104976] xt_time: kernel timezone is -0000
  122. [    3.109565] ipip: IPv4 over IPv4 tunneling driver
  123. [    3.114926] gre: GRE over IPv4 demultiplexor driver
  124. [    3.119887] ip_gre: GRE over IPv4 tunneling driver
  125. [    3.126091] ip_tables: (C) 2000-2006 Netfilter Core Team
  126. [    3.131687] arp_tables: (C) 2002 David S. Miller
  127. [    3.136478] Initializing XFRM netlink socket
  128. [    3.141016] NET: Registered protocol family 10
  129. [    3.156725] mip6: Mobile IPv6
  130. [    3.159805] ip6_tables: (C) 2000-2006 Netfilter Core Team
  131. [    3.165707] sit: IPv6 over IPv4 tunneling driver
  132. [    3.171683] NET: Registered protocol family 17
  133. [    3.176230] NET: Registered protocol family 15
  134. [    3.180918] Bluetooth: RFCOMM TTY layer initialized
  135. [    3.185882] Bluetooth: RFCOMM socket layer initialized
  136. [    3.191208] Bluetooth: RFCOMM ver 1.11
  137. [    3.195051] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  138. [    3.200479] Bluetooth: BNEP filters: protocol multicast
  139. [    3.205788] Bluetooth: BNEP socket layer initialized
  140. [    3.210866] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  141. [    3.216868] Bluetooth: HIDP socket layer initialized
  142. [    3.222042] l2tp_core: L2TP core driver, V2.0
  143. [    3.226493] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  144. [    3.231404] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  145. [    3.237073] l2tp_netlink: L2TP netlink interface
  146. [    3.241843] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  147. [    3.247844] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  148. [    3.254437] Key type dns_resolver registered
  149. [    3.259187] ThumbEE CPU extension supported.
  150. [    3.263601] Registering SWP/SWPB emulation handler
  151. [    3.269054] bootconsole [earlycon0] disabled
Copy code
Published in 2015-10-18 00:05:53 | Show all floors
@elcct: go on, don't give up, I wish you luck.
Please share you work and progress.
Orange PI PC

9

threads

634

posts

4429

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4429
 Author| Published in 2015-10-18 01:50:21 | Show all floors
Edited by igorpec at 2015-10-17 18:55
  1. Brought up 1 CPUs
  2. SMP: Total of 1 processors activated (48.00 BogoMIPS).
Copy code

Low speed single core mode with serial console. Not much

This stage hasn't been change for a while.

Hardware schematics:
http://forum.armbian.com/index.p ... =attach&attach_id=2

1

threads

12

posts

73

credits

Registered member

Rank: 2

credits
73
Published in 2015-10-20 00:42:12 | Show all floors
One core is probably because SVC mode. I have hacked u-boot to switch cpu into HYP mode before launching the kernel, but for some reason u-boot no longer booting the device.

I tweaked u-boot from this repo https://github.com/loboris/OrangePI-Kernel

Then I wrote resulting .bin to the sd card with

dd if=u-boot-sun8i7w1.bin of=/dev/sdX bs=1024 seek=32

But that didn't work. Probably I also need spl, but for some reason it doesn't build.

Has anyone tried any new version of u-boot? Or why this particular version is being used?

Thanks

9

threads

634

posts

4429

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4429
 Author| Published in 2015-10-20 02:30:44 | Show all floors
This u-boot came from here:
https://github.com/allwinner-zh/bootloader

script.bin support is there but haven't try if it works. Loboris does not use it.

There is a bit better patch out: http://moinejf.free.fr/opi2/u-boot.patch
script.bin and uEnv.txt

I don't know for any other at the moment - am also playing with it ... not much luck either. I need to add a boot script support to match my standard boot procedure.

1

threads

47

posts

189

credits

Registered member

Rank: 2

credits
189
Published in 2015-10-20 02:43:37 | Show all floors
Jens has done job on the mainline U-boot, but nothing since August. Anyway, the problem is not the boot: the mainline kernel does not support fully the Allwinner SoCs.

I started from Jens' patch series (May 2015) and modified it for the kernel 4.3.
Below is today's result. My machine is an OPI2 (the machine name is the one of the DT) booting from the lichee u-boot. There are only 2 drivers: UART and MMC. With the kernel 4.2, I could log in. Now, systemd crashes. I'll look at this tomorrow...
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Linux version 4.3.0-rc2-00001-g21d32e6-dirty (jef@OPI2) (gcc version 5.2.1 20151010 (Debian 5.2.1-22) ) #18 SMP Mon Oct 19 16:05:57 CEST 2015
  3. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  4. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [    0.000000] Machine model: Xunlong Orange Pi Plus
  6. [    0.000000] Memory policy: Data cache writealloc
  7. [    0.000000] On node 0 totalpages: 262144
  8. [    0.000000] free_area_init_node: node 0, pgdat c05d7980, node_mem_map eeffa000
  9. [    0.000000]   Normal zone: 1520 pages used for memmap
  10. [    0.000000]   Normal zone: 0 pages reserved
  11. [    0.000000]   Normal zone: 194560 pages, LIFO batch:31
  12. [    0.000000]   HighMem zone: 67584 pages, LIFO batch:15
  13. [    0.000000] PERCPU: Embedded 12 pages/cpu @eefbc000 s17536 r8192 d23424 u49152
  14. [    0.000000] pcpu-alloc: s17536 r8192 d23424 u49152 alloc=12*4096
  15. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  16. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
  17. [    0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200
  18. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  19. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  20. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  21. [    0.000000] Memory: 1033096K/1048576K available (4433K kernel code, 137K rwdata, 1180K rodata, 200K init, 249K bss, 15480K reserved, 0K cma-reserved, 270336K highmem)
  22. [    0.000000] Virtual kernel memory layout:
  23. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  24. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  25. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  26. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  27. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  28. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  29. [    0.000000]       .text : 0xc0008000 - 0xc0583840   (5615 kB)
  30. [    0.000000]       .init : 0xc0584000 - 0xc05b6000   ( 200 kB)
  31. [    0.000000]       .data : 0xc05b6000 - 0xc05d8620   ( 138 kB)
  32. [    0.000000]        .bss : 0xc05d8620 - 0xc0616bf8   ( 250 kB)
  33. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  34. [    0.000000] Hierarchical RCU implementation.
  35. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  36. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  37. [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  38. [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  39. [    0.000000] Console: colour dummy device 80x30
  40. [    0.000000] console [tty1] enabled
  41. [    0.060000] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
  42. [    0.060000] pid_max: default: 32768 minimum: 301
  43. [    0.060000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  44. [    0.060000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  45. [    0.060000] CPU: Testing write buffer coherency: ok
  46. [    0.060000] /cpus/cpu@0 missing clock-frequency property
  47. [    0.060000] /cpus/cpu@1 missing clock-frequency property
  48. [    0.060000] /cpus/cpu@2 missing clock-frequency property
  49. [    0.060000] /cpus/cpu@3 missing clock-frequency property
  50. [    0.060000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  51. [    0.060000] Setting up static identity map for 0x40008200 - 0x40008234
  52. [    0.060000] Brought up 1 CPUs
  53. [    0.060000] SMP: Total of 1 processors activated (2387.14 BogoMIPS).
  54. [    0.060000] CPU: All CPU(s) started in SVC mode.
  55. [    0.060000] devtmpfs: initialized
  56. [    0.060000] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  57. [    0.060000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  58. [    0.060000] xor: measuring software checksum speed
  59. [    0.160000]    arm4regs  :  1528.800 MB/sec
  60. [    0.260000]    8regs     :  1055.600 MB/sec
  61. [    0.360000]    32regs    :  1053.600 MB/sec
  62. [    0.360000] xor: using function: arm4regs (1528.800 MB/sec)
  63. [    0.360000] pinctrl core: initialized pinctrl subsystem
  64. [    0.360000] NET: Registered protocol family 16
  65. [    0.360000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  66. [    0.360000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  67. [    0.360000] hw-breakpoint: maximum watchpoint size is 8 bytes.
Copy code



5

threads

354

posts

2733

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
2733
Published in 2015-10-20 02:50:52 | Show all floors
I'm a little confused, this thread Orange PI with 4.2.2 and 3.4.109 is about orange PI = A20 Soc and not orange pi2/plus/pc = H3.
Is this correct or I'm wrong?
Boards:
orangepi plus, olinuxino A20, cubieboard A10, mele A2000 .....

9

threads

634

posts

4429

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4429
 Author| Published in 2015-10-20 03:39:36 | Show all floors
You are right and wrong ;)

Armbian / this thread / image / project doesn't support H3 ... we are just researching possibilities. Maybe it's time to (try) to make some progress.

9

threads

634

posts

4429

credits

Moderator

Rank: 7Rank: 7Rank: 7

credits
4429
 Author| Published in 2015-10-21 02:40:16 | Show all floors
elcct replied at 2015-10-19 17:42
One core is probably because SVC mode. I have hacked u-boot to switch cpu into HYP mode before launc ...

You need to patch uboot - add a script.bin to it, otherwise no go. It would be nice to resolve what this tool actually do.http://linux-sunxi.org/H3_Manual_build_howto


# Patch U-Bootpctools/linux/mod_update/update_uboot out/u-boot.fex out/sys_config.bin

I build uboot from original source + compiler patch (that i can compile with standard compiler) and it's working as is ... but to fix all what's needed / expected looks like a lot of work? Already spent 1000 USD in R&D

1

threads

12

posts

73

credits

Registered member

Rank: 2

credits
73
Published in 2015-10-21 07:12:35 | Show all floors
Now it shows me this

  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. fel_flag = 0x00000000
  4. rtc[0] value = 0x00000000
  5. rtc[1] value = 0x00000000
  6. rtc[2] value = 0x00000000
  7. rtc[3] value = 0x00000000
  8. rtc[4] value = 0x00000000
  9. rtc[5] value = 0x00000000
  10. rtc[6] value = 0x00000000
  11. rtc[7] value = 0x00000000
  12. DRAM DRIVE INFO: V0.8
  13. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM CLK = 672 MHz
  15. DRAM zq value: 003b3bfb
  16. READ DQS LCDL = 001c1c1c
  17. DRAM SIZE =1024 M
  18. odt delay
  19. dram size =1024
  20. card boot number = 0
  21. card no is 0
  22. sdcard 0 line count 0
  23. [mmc]: mmc driver ver 2014-12-10 21:20:39
  24. [mmc]: ***Try SD card 0***
  25. [mmc]: mmc 0 cmd 8 err 00000002
  26. [mmc]: mmc 0 cmd 8 err 00000002
  27. [mmc]: mmc 0 send if cond failed
  28. [mmc]: mmc 0 cmd 55 err 00000002
  29. [mmc]: mmc 0 cmd 55 err 00000002
  30. [mmc]: mmc 0 send app cmd failed
  31. [mmc]: ***Try MMC card 0***
  32. [mmc]: mmc 0 cmd 1 err 00000002
  33. [mmc]: mmc 0 cmd 1 err 00000002
  34. [mmc]: mmc 0 send op cond failed
  35. [mmc]: mmc 0 Card did not respond to voltage select!
  36. [mmc]: ***SD/MMC 0 init error!!!***
  37. [mmc]: mmc 0 register failed
  38. Fail in Init sdmmc.
  39. Ready to disable icache.
Copy code


And stops. Looks like I have an error somewhere. Will leave it for the weekend...
You need to log in before you can reply login | Register

Points Rule

Quick reply Top Return list