H3Droid - Android image developed specifically to work on Allwinner H3 devices

pmpp · Published in 2017-7-16 22:12:24

@arcslack , if you are on windows 7+ OS you can use https://h3droid.com/fel/ for pi+2E board. You will need only a microusb data cable. If you have any trouble contact me on h3droid.com chatbox.

DrDexter · Published in 2017-7-17 16:36:25

Is it possible with FEL installer install H3droid on USB Flash Pen Drive?
Like example i have small and slow SD cart, can i install only boot sector on it and all rest on USB Flash Pen Drive?

pmpp · Published in 2017-7-17 17:35:02

@DrDexter, my rework of fel installer will be able to install on emmc / mmc / AOE disk / usb mass storage ( key / harddisk / ssd&msata ) and hopefully will be tested on *all* xunlong boards as soon as they arrive ;)

DrDexter · Published in 2017-7-19 16:25:37

Is some one run FEL on windows 10? I stuck on moment when windows should request permision to run freeeject. FEL installer just freeze and can not even press Abort

Gabrieldxgpx3 · Published in 2017-7-19 21:35:59

Hi everyone, I have a problem with the sunxi_ir_rx module, I tried to put it to boot in the /data/rc.local file it starts but it does not work, I have to reload it with rmmod and insmod . I have also tried to put rmmod before insmod in the rc.local file but it does not work. There's another way to make it work, sorry, my English is translating.

Jazzinsa · Published in 2017-7-25 03:23:58

After an epic struggle for one whole day I have actually managed to get Android running with this build. An yes My compliments to the coders. This may very well be the ONLY working version of Andriod on the Orange Pi One. YES YES you can say whatever you want you didnt have the day I had.

The following works that I'm super impressed with....

1. All the apps... thats auto installed.
2. I logged into my google account an it all comms zooming to me, I whole Google infrastructure right here on my $7 Pi. ( Gosh comming to think of it, its actually almost cheaper than a real beef Pi )
3. 4K mode, Yes folks, 4K works!
4. ... with sound.
5. Ethernet
6. Both Usb's (normal and OTG)
7. The ON/OFF power button
And I didnt even know the device had a green LED on as well.

I'll be doing so stuff with my Pi's going forward and will report if I see some "iggys" but thus far...

... Guys (and girl) you did a splendid job!

Gabrieldxgpx3 · Published in 2017-7-26 21:11:36

Hi guys, how to switch GPIO from the leds on the orange pi pc?

barrymosselust · Published in 2017-7-29 20:09:17

How do I connect via SSH?

Gabrieldxgpx3 · Published in 2017-7-29 21:46:30

barrymosselust replied at 2017-7-29 20:09
How do I connect via SSH?

You need to copy your ssh public key to the orange pi

kotcza · Published in 2017-8-8 19:47:08

or use 1.3.0+ h3resc to generate keypair that later can be used with android app to have local root shell. [teaser] did i mention 1.3.0? it has bluetooth, new partition layout (3 instead of 16), opi0+2h3 support and few other improvements. release this/next week. yay?[/teaser]