Only one usb port is working

giaur500

Hi,

OrangePI PC. I can't use multiple usb ports at the same time. For example, if I connect usb mouse, it works. Then, usb keyboard to second usb port and keyboard does not work (not recognized and not even powered).

However, if I use external usb hub, I can connect multiple devices to it and all is ok. What's the problem? Do you have any ideas? Possible my power ac adaptor is weak? But it's 2A as recommended.

yoshi

Dear on4top.
Thank you very much!
As you say download the lastes Uimage & script.bin and usb ports is working

yeyeto2788

Hi! I had the same issue.

I used a powered 7 USB port hub with mouse, keyboard, and a pen drive and all worked.

That could be the kernel or probably the power supply.

(I used a 2A 5V power suply but still)

yeyeto2788

You can also check this thread that we're waiting for a reply

http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=471&page=1#pid3822

giaur500

I tested with another power supply (4A max) still the same. So rather software issue? System - Debian Jessie/Xfce - I updated it to Sid.

yoshi

I had same issue too.
Only one usb port is working.

I read this thread and I tried this method
http://www.orangepi.org/orangepi ... =471&page=1#pid3822

But it did not improve.
I tried 3 images
OrangePI_Ubuntu_Vivid_Mate.img    Ubuntu 15.04 with Mate Desktop
OrangePI_Lubuntu_Vivid.img             Lubuntu 15.04 with LXDE/Lubuntu Desktop
OrangePI_Jessie_Xfce.img                Debian 8 with XFCE Desktop

In this procedure
1.Download the images (xz archive) from Google Drive
2.Unpack the archive.
3.Write the OrangePI_Jessie_Xfce.img file (disk image) to my SD Card(Same result:OrangePI_Lubuntu_Vivid.img and OrangePI_Ubuntu_Vivid_Mate.img)
on Windows use disk image writing software Win32 Disk Imager
4.After writing the image, mount SD Card FAT partition (BOOT) Copy uImage_OPI-2 to uImage
5.Copy the script.bin.OPI-PC_1080p60 to script.bin
(Same result:script.bin.OPI-PC_1080p50 to script.bin)
6.Boot my Orange PI board from SD Card

But Only one usb port is working.
To my procedure Is there a mistake ?

on4top

I had the same problem .. download the lastes Uimage & script.bin and usb ports wil be working ..

https://mega.nz/#F!wh8l2BjK!OBep3nMldBletvNNwkH2Jg

script_kernel.tar.gz .. en copy them to the boot partion of your sdcard .. ( remove the ones included in the image ) ..

jacer

For those with only one USB port working, download attached files and extract to BOOT partition (FAT filesystem) of the TF card.Notice: It is for the OPI-PC only.

yoshi

on4top replied at 2015-10-4 09:51
I had the same problem .. download the lastes Uimage & script.bin and usb ports wil be working ..

...

Dear on4top

Thanks to youMy Orange PI PC was working.
USB 3Ports.I tried download script_kernel.tar.gz read this url.
http://www.orangepi.org/orangepi ... wthread&tid=342
and unzip script_kernel.tar.gz
Rename these files
script.bin.OPI-PC_1080p60 to script.bin
uImage_OPI-2 to uImage
copy them to the boot partion of my sdcard.

giaur500

yoshi replied at 2015-10-10 15:36
Dear on4top

Thanks to youMy Orange PI PC was working.

Will it work on Android?