Linux Image for Orange Pi 4G-IOT is avaialble

admin

Linux image(Ubuntu16.04)  for Orange Pi 4G-IOT have been released, there are two images: one for emmc booting, the other for sd card booting

Download Link attached: http://www.orangepi.org/download ... 0588ca8437b625.html

admin

AlexFBG replied at 2018-12-6 18:51
This foto

Pls login from the serial port. For now linux cant display on the screen

dinobei

Hi.
i want to use modem in this board.
i had been search in this site (and google) for a week, but could not find any solution.
Any solution available?

thank you in advanced.

redax

is that pads are the serial console, on the back side of the PCB, next to the SIM socket?
what voltage does it use? 5v / 3.3 ?

Alex_Savi

redax replied at 2019-2-19 04:08
is that pads are the serial console, on the back side of the PCB, next to the SIM socket?
what volta ...

It is UART, 2V. I connected TX0 to CP2102, RX0 to half divider (470 Ohm+470 Ohm) to CP2102. For link: sudo minicom -b 921600 -D /dev/ttyUSB0

lcuervo

what works and what doesn't works?

AlexFBG

Stop on the logo and the inscription "Normal boot". The keyboard is not initialized. How to enter?

admin

AlexFBG replied at 2018-12-5 08:44
Stop on the logo and the inscription "Normal boot". The keyboard is not initialized. How to enter?

Hi friend,  pls provide me some photos of the problem you described.Thanks

AlexFBG

OK, just a little later. No installation instructions? When installing on EMMS, do I need to install files on SD card?

lcuervo

Could we get souce code of this?

admin

AlexFBG replied at 2018-12-5 09:44
OK, just a little later. No installation instructions? When installing on EMMS, do I need to install ...

This is the User Manual.
http://www.orangepi.org/download ... dc7d3335c3afb3.html

AlexFBG

After loading, there is no initialization of the keyboard. Unable to boot. Power in USB is coming. I do not understand the meaning of normal boot system.

AlexFBG

This foto