how to make H3Droid into sd card

tlmwt

hi,I am new in linux,i cant understand the H3Droid usage,expecially step 3.4,i have tried but failed.can someone give me some picture in every step?thx

tlmwt

any img for lite? i need it

DrDexter

Step 1: Install or run live cd Linux. (I use Ubuntu live CD)
Step 2: Connect your cart reader or insert SD cart
Step 3: Open terminal and type lsblk -l you will see list of all your hard drives with ID's
Step 4: Check under what ID is your sd cart or cart reader and remember
Step 5: (Optional)Type in terminal sudo ssh-keygen agree with all requests, set file name as h3droid and skip pass phraze
Step 6: Go to Gpart application and delete all partitions on your SD cart (also you will see your SD cart ID there)
Step 7: (Optional if you made step 5) Go home folder and copy h3droid.pub file to h3droid installer folder
Step 8: Find in h3droid installer folder 00_conf file and edit it.
You will see:
# either define OUTDEV in your script or add it here:
#OUTDEV=/dev/sdX
#OUTDEV=/dev/mmcblkX
Just remove # sign before one of the lines and change X in te end of the line to your SD card ID
Usually for USB cart readers its sda and for laptop cart readers its mmcblk0, but yours can be another
Step 9: Open terminal in h3droid installer folder and drag to terminal 10_init_new_card.sh add sudo before and hit enter. Follow instructions (choose upgrade, your model u-boot and your model fex)

tlmwt

DrDexter replied at 2017-6-15 10:42
Step 1: Install or run live cd Linux. (I use Ubuntu live CD)
Step 2: Connect your cart reader or ins ...

thanks a lot .i know where i may make a mistake.#OUTDEV=/dev/sdX,
i remove the #,but i did not chang X. i  will try again .thank you

tlmwt

DrDexter replied at 2017-6-15 10:42
Step 1: Install or run live cd Linux. (I use Ubuntu live CD)
Step 2: Connect your cart reader or ins ...

hi are you on line?
i clean up the sdcard, make  #OUTDEV=/dev/sdX become #OUTDEV=/dev/sdb
and then 10_init_new_card.sh .  but i failed again. there is no sign for the opi lite work.

DrDexter

What you meen?

no sign

So anyway, it will not work onpi lite.

I have also Opi Lite, I create image without anyerrors but my Opi Lite boot up in h3resc menu and stops.

I try to ask support but they are telling me createanother u-boot or wait for 1.2.8.

So i not so good to create new U-boot and now justwaiting for 1.2.8

tlmwt

DrDexter replied at 2017-6-15 13:51
What you meen?

hdmi  screen has no sign,the red led does not light.

tlmwt

DrDexter replied at 2017-6-15 13:51
What you meen?

i think step 1-6 is to clean up the sd card and know the number of sdcard.is that right?  i just go to the gparted,clean up and know it is dev/sdb .and i did not  copy h3droid.pub file ,does it matter?

DrDexter

SSH you can skip, its only for remote control from computer.
I saw your screen, linux made partitioning on your sd cart, so everything shold be good

tlmwt

DrDexter replied at 2017-6-15 13:51
What you meen? So anyway, it will not work onpi lite.I have also Opi Lite, I create image without an ...

you have failed work on pi lite?
i go to freenode to ask supporter,he tells me he has opi lite and can work...
i am waiting tools in windows too.
pi lite can not use ssh,,,it dose not hava a Ethernet. supporter tells me use uart to know why failed,but i dont have a uart to usb model...