orangepi pc does not boot

sihorton

I have downloaded and burned OrangePI-PC_Ubuntu_Vivid_Mate.img to a 16gig sd card. I have connected a uart serial -> usb and get the following in the terminal when I power on the board (an orange pi pc):-

HELLO! BOOT0 is starting!
boot0 version : 4.0.0
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2DR2,3DR3,6PDDR2,7PDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 001c1c1e
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2014-12-10 21:20:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 15240MB
[mmc]: vendor: Man 00123456 Snr 000013a4
[mmc]: product: SD[mmc]: revision: 0.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE   
already secure mode

[      0.345]

U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology

[      0.353]version: 1.1.0
normal mode
[      0.360]pmbus:   ready
not set main pmu id
axp_probe error
[      0.375]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mh

The board is plugged into the router via the network jack but no board comes up via dhcp. When I power on the board then the network lights turn on solidily the entire time, they do not flicker or blink at all. I do not see any other leds that light up on the board. The tv knows the board is plugged in to it but shows a black screen.

Can anyone see what is wrong?