how to make H3Droid into sd card

DrDexter · Published in 2017-6-15 14:18:29

Edited by DrDexter at 2017-6-15 14:28

for me its
File not found /0rrd **
errorbut i ask in h3droid chat they say its common problem for opi lite and will be fixed in 1.2.8

tlmwt · Published in 2017-6-15 14:24:32

DrDexter replied at 2017-6-15 14:18
for me its
File not found /0rrd **
errorbut i ask in h3droid chat they say its common problem for op ...

i try it again...and wait.....
the only thing ican do is waiting for red led light or update to 1.2.8...lol

DrDexter · Published in 2017-6-16 09:04:22

Edited by DrDexter at 2017-6-16 15:25

I succeed to create 1.2.6 same way and its working, only when its ask to switch off auto mount I answer N
And on screen to choose u boot I chose opi one.There is my full log:

ubuntu@ubuntu:/media/ubuntu/DED25F90D25F6BB1/1/h3droid_installer-1.2.6$ sudo '/media/ubuntu/DED25F90D25F6BB1/1/h3droid_installer-1.2.6/10_init_new_card.sh'
target device: /dev/mmcblk0
/dev/mmcblk0 has 15126528 sectors (7386 MB)
how big should UDATA (/data) partition be? (768..5862) 2048
UDISK will be set to 2048 MB
/dev/mmcblk01 : start= 16384, size= 65408, Id=83, bootable
/dev/mmcblk02 : start= 3117056, size= 4194304, Id=83
/dev/mmcblk03 : start= 81920, size= 3035008, Id=85
/dev/mmcblk04 : start= 0, size= 0, Id=0
/dev/mmcblk05 : start= 86016, size= 32640, Id=83
/dev/mmcblk06 : start= 118784, size= 65408, Id=83
/dev/mmcblk07 : start= 184320, size= 1580928, Id=83
/dev/mmcblk08 : start= 1765376, size= 32640, Id=83
/dev/mmcblk09 : start= 1798144, size= 65408, Id=83
/dev/mmcblk010 : start= 1863680, size= 8064, Id=83
/dev/mmcblk011 : start= 1871872, size= 32640, Id=83
/dev/mmcblk012 : start= 1904640, size= 32640, Id=83
/dev/mmcblk013 : start= 1937408, size= 32640, Id=83
/dev/mmcblk014 : start= 1970176, size= 65408, Id=83
/dev/mmcblk015 : start= 2035712, size= 32640, Id=83
/dev/mmcblk016 : start= 2068480, size= 1048448, Id=83

automount is enabled, can i disable it? (y/N)n
automount disabled. you can reenable it with: gsettings set org.gnome.desktop.media-handling automount
sfdisk: --Linux option is unnecessary and deprecated
[5]rereadpt OK
mke2fs 1.42.13 (17-May-2015)

adding h3droid.pub to authorized_keys

mke2fs 1.42.13 (17-May-2015)
mkfs.fat 3.0.28 (2015-05-16)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.28 (2015-05-16)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mke2fs 1.42.13 (17-May-2015)
/dev/mmcblk0p1    30641       23274    6713          78% /media/ubuntu/DED25F90D25F6BB1/1/h3droid_installer-1.2.6/fs_tmp
mke2fs 1.42.13 (17-May-2015)
/dev/mmcblk0p6    30641       14674    15313          49% /media/ubuntu/DED25F90D25F6BB1/1/h3droid_installer-1.2.6/fs_tmp
mke2fs 1.42.13 (17-May-2015)
/dev/mmcblk0p7 761616    336400 409408          46% /media/ubuntu/DED25F90D25F6BB1/1/h3droid_installer-1.2.6/fs_tmp
1 uboots/test/fel-sdboot.sunxi
2 uboots/test/uart0-helloworld-sdboot.sunxi
3 uboots/opi+2e/u-boot-sunxi-with-spl.bin-opip2e-usb-nonet-gpios
4 uboots/opi+2e/u-boot-sunxi-with-spl.bin-opip2e-usb-nonet
5 uboots/opi+2e/u-boot-sunxi-with-spl.bin-opip2e-nodisp-nousb-nonet-gpios
6 uboots/opi+2e/u-boot-sunxi-with-spl.bin-opip2e
7 uboots/opi+2e/u-boot-sunxi-with-spl.bin-opip2e-nousb-nonet
8 uboots/opipc/u-boot-sunxi-with-spl.bin-opipc
9 uboots/opipc/u-boot-sunxi-with-spl.bin
10 uboots/opipcplus/u-boot-sunxi-with-spl.bin
select file to write to /dev/mmcblk0 or <ENTER> to skip.. 8

writing uboots/opipc/u-boot-sunxi-with-spl.bin-opipc
433+1 записей получено
433+1 записей отправлено
443445 байт (443 kB, 433 KiB) скопирован, 0,0973732 s, 4,6 MB/s
1 ./H3/bananapim2plus.bin
2 ./H3/orangepione.bin
3 ./H3/orangepi2.bin
4 ./H3/orangepipc.bin
5 ./H3/beelinkx2.bin
6 ./H3/nanopim1.bin
7 ./H3/orangepiplus2e.bin
8 ./H3/orangepipcplus.bin
9 ./H3/orangepiplus.bin
10 ./H3/orangepizero.bin
11 ./H3/nanopineo.bin
12 ./H3/nanopiair.bin
13 ./H3/orangepilite.bin
14 ./kc/script-opipc.bin
15 ./kc/script-opip2e-kc.bin
select fex to activate or <ENTER> to skip.. 13
activating ./H3/orangepilite.bin
image created on /dev/mmcblk0

tlmwt · Published in 2017-6-17 16:02:57

DrDexter replied at 2017-6-16 09:04
I succeed to create 1.2.6 same way and its working, only when its ask to switch off auto mount I ans ...

I used the tool in windows by pmpp on the h3droid chat room..and i am running h3droid on lite now..
thank you for your help.

DrDexter · Published in 2017-6-17 16:25:48

Now next step - how to root?

tlmwt · Published in 2017-6-17 16:35:05

Edited by tlmwt at 2017-6-17 16:49

DrDexter replied at 2017-6-17 16:25
Now next step - how to root?

what do you mean? root the 4.4.2 system?
seems h3droid is not rooted....

tlmwt · Published in 2017-6-19 22:23:57

DrDexter replied at 2017-6-17 16:25
Now next step - how to root?

it is said in 1.2。9 will be root.