Linux not start from U-Boot

kirill

Hello!
I work with OrangePi PC v1.2 board.
I build linux from https://github.com/ssvb/linux-sunxi, branch 20151207-embedded-lima-memtester-h3, and mainline u-boot.
Follow U-Boot output:

1. U-Boot SPL 2016.03-g080c499 (Mar 30 2016 - 11:36:12)
   
2. DRAM: 1024 MiB
   
3. Trying to boot from MMC1
   
4. 
   
5. 
   
6. U-Boot 2016.03-g080c499 (Mar 30 2016 - 11:36:12 +0300) Allwinner Technology
   
7. 
   
8. CPU:   Allwinner H3 (SUN8I)
   
9. Model: Xunlong Orange Pi PC
   
10. I2C:   ready
    
11. DRAM:  1 GiB
    
12. MMC:   SUNXI SD/MMC: 0
    
13. *** Warning - bad CRC, using default environment
    
14. 
    
15. In:    serial
    
16. Out:   serial
    
17. Err:   serial
    
18. Net:   No ethernet found.
    
19. starting USB...
    
20. USB0:   USB EHCI 1.00
    
21. USB1:   USB OHCI 1.0
    
22. USB2:   USB EHCI 1.00
    
23. USB3:   USB OHCI 1.0
    
24. USB4:   USB EHCI 1.00
    
25. USB5:   USB OHCI 1.0
    
26. scanning bus 0 for devices... 1 USB Device(s) found
    
27. scanning bus 2 for devices... 1 USB Device(s) found
    
28. scanning bus 4 for devices... 1 USB Device(s) found
    
29. Hit any key to stop autoboot:  0
    
30. switch to partitions #0, OK
    
31. mmc0 is current device
    
32. Scanning mmc 0:1...
    
33. Found U-Boot script /boot.scr
    
34. reading /boot.scr
    
35. 241 bytes read in 17 ms (13.7 KiB/s)
    
36. ## Executing script at 43100000
    
37. reading script.bin
    
38. 36044 bytes read in 64 ms (549.8 KiB/s)
    
39. reading uImage
    
40. 6817600 bytes read in 6952 ms (957 KiB/s)
    
41. ## Booting kernel from Legacy Image at 48000000 ...
    
42.    Image Name:   Linux-3.4.39+
    
43.    Image Type:   ARM Linux Kernel Image (uncompressed)
    
44.    Data Size:    6817536 Bytes = 6.5 MiB
    
45.    Load Address: 40008000
    
46.    Entry Point:  40008000
    
47.    Verifying Checksum ... OK
    
48.    Loading Kernel Image ... OK
    
49. 
    
50. Starting kernel ...

Copy code

How can I solve this problem?
Thnak you and excuse my bad english.

phelum

Hi,

My guess is that the "machid" doesn't match what the kernel expects.  If this is the case you'll have to add a "machid=????" line to boot.scr.  But unfortunately I don't know what machine ID your kernel expects.

Cheers,
Steven

kirill

Thank you!
Set machid and bootm_boot_mode solve problem.
Early I use U-Boot from prebuilded image orangepi-plus-debian-server-card-v0.9.img and linux start without boot.cmd and script.bin.