OrangePi 3 LTS not booting

Jamesb4uk · Published in 2022-9-1 02:44:53

Hi All,

I've been sratching my head on this one for a while now & hope somone can help.

I've been playing with my 3LTS a while now & a few weeks ago its started not booting (i believe i was running debian server with OctoPrint on it as the installed OS on EMMC), i'm trying both Armbian 22.08.1 Jammy desktop & CLI images. With the debug unplugged all i get is a red light, no screen output at all, tried fresh 32gb SD cards, different power supplies all generate the same result.

With the debug port connected i'm getting the following. (the output is same from CLI & Desktop varients) Armbian is actually the only thing i can get to even output.

Am i right thinking the EMMC or Bootloader is corrupt going by the outputs below:

Ramdisk image is corrupt or invalid
BootOrder not defined
EFI boot manager: Cannot load any image

Full output from bootup

U-Boot SPL 2021.10-orangepi (May 31 2022 - 14:36:00 +0800)
DRAM: 2048 MiB
Trying to boot from MMC2
NOTICE: BL31: v2.2(debug):a04808c1
NOTICE: BL31: Built : 18:35:04, Mar 9 2022
NOTICE: BL31: Detected Allwinner H6 SoC (1728)
NOTICE: BL31: Found U-Boot DTB at 0xc07c178, model: OrangePi 3 LTS
INFO: ARM GICv2 driver initialized
NOTICE: PMIC: Probing AXP805
NOTICE: PMIC: AXP805 detected
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2021.10-orangepi (May 31 2022 - 14:36:00 +0800) Allwinner Technology
CPU: Allwinner H6 (SUN50I)
Model: OrangePi 3 LTS
DRAM: 2 GiB
MMC: mmc@4020000: 0, mmc@4022000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3206 bytes read in 2 ms (1.5 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
203 bytes read in 1 ms (198.2 KiB/s)
37593 bytes read in 4 ms (9 MiB/s)
3844 bytes read in 3 ms (1.2 MiB/s)
Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
## Executing script at 45000000
13044840 bytes read in 645 ms (19.3 MiB/s)
25868296 bytes read in 1278 ms (19.3 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=41c00000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 13044776 Bytes = 12.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
Ramdisk image is corrupt or invalid
SCRIPT FAILED: continuing...
Scanning disk mmc@4020000.blk...
Scanning disk mmc@4022000.blk...
Found 4 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3202 bytes read in 4 ms (781.3 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
154 bytes read in 3 ms (49.8 KiB/s)
37640 bytes read in 13 ms (2.8 MiB/s)
3844 bytes read in 8 ms (468.8 KiB/s)
Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
## Executing script at 45000000
12998694 bytes read in 2101 ms (5.9 MiB/s)
21866504 bytes read in 3532 ms (5.9 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=41730000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 12998630 Bytes = 12.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
Ramdisk image is corrupt or invalid
SCRIPT FAILED: continuing...
BootOrder not defined
EFI boot manager: Cannot load any image
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found

Copy code

i've tried multiple images, Debian, Ubuntu & Android. cant get this board to boot properly.

Is it recoverable or a paperweight?

Kind Regards
James

heravinluca · Published in 2022-9-13 09:37:26

Sorry for not being able to help you. I'm commenting on this post in the hope that it's pushed to the front page and someone can see it and help you. Have a nice day with the 1v1 battle game, you will definitely feel more relaxed and work more efficiently.

robertmay17 · Published in 2022-9-14 16:38:27

Please provide a detailed explanation of the steps I need to take to create a bootable OS disk image. Is it not sufficient to simply have the image on the card? Should I burn the bootloader, pacman 30th anniversary and if so, which one should I use? As soon as the microSD card is inserted, nothing happens. Thanks

luckywin · Published in 2023-3-13 16:25:53

In your spare time, you should pay attention to trap the cat, I think you will not be disappointed!

willtoreto00 · Published in 2023-5-21 15:58:56

We'll discuss important factors to consider, such as licensing, insurance coverage, customer reviews, and track record. By conducting thorough research and due diligence, you can find a trustworthy company to handle your car shipping needs. Generators Shipping Cost

jendy · Published in 2023-6-5 10:20:43

Having recently encountered booting issues with the OrangePi 3 LTS, I'd like to share my 2048 cupcakes experience and potential solutions. It's important to note that troubleshooting such problems can be challenging, but with some patience and basic technical knowledge, they can often be resolved.

arrangedig · Published in 2023-6-13 09:50:06

In this section, we will talk about several crucial considerations, such as license, insurance coverage, reviews from previous customers, and track record. free games

Kikimoon · Published in 2023-7-4 04:22:43

Have you ever wished approximately a group of top-tie specialists boosting your ventures? Possibly you would like proficient bolster in a specific trade area? Are you searching for help together with your thoughts and plans? At Sea Control, we OceanPower offer assistance individuals, businesses and companies of all sizes to scale promoting.

kingabort · Published in 2023-7-7 23:52:15

The displacement hull shape on a longboard surfboard is perfect for those seeking a smooth, effortless glide. It's designed to slice through the water, providing a unique sensation. https://howtoridealongboard.com/ ... ing-on-rough-roads/

latham · Published in 2023-7-22 16:57:51

Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info. Situs69