[Solved]How to config LIRC?

edu_viccini · Published in 2017-6-1 08:04:09

Edited by edu_viccini at 2017-6-8 05:54

Hi guys,

I'm tryiing to make the ir remote control the MPC (Media Player Daemon), but with no sucess.

The system receive the code but not execute the command to mpc.

I put the .lircrc on /home/Myuser, ~/.lircrc , /etc/lirc/lircrc.

I follow this:
http://codelectron.com/how-to-se ... g-lircd-and-python/
but try the armbian doc and the lirc docs.

Anyone have this trouble?

nopnop2002 · Published in 2017-6-6 07:00:39

edu_viccini replied at 2017-6-6 04:58
Nope... thats ls /dev/lirc* only show lirc0

Try service command.
It's mine.

orangepi@orangepizero:~$ sudo service --status-all | grep lirc
[ + ] lirc
[ ? ] rc.usbsrvd

nopnop2002 · Published in 2017-6-3 17:21:45

Edited by nopnop2002 at 2017-6-3 17:30

Try irw.
http://www.lirc.org/html/irw.html
When setting is right, it's indicated as follows.

orangepi@orangepipc:~$ irw
0000000000ff02fd 00 UP KODAC
0000000000ff02fd 01 UP KODAC
0000000000ffe01f 00 LEFT KODAC
0000000000ffe01f 01 LEFT KODAC
0000000000ff9867 00 DOWN KODAC
0000000000ff9867 01 DOWN KODAC

edu_viccini · Published in 2017-6-4 06:24:25

thanks for the answer!! but i had try the irw, notthing appears.

nopnop2002 · Published in 2017-6-4 07:32:55

Edited by nopnop2002 at 2017-6-4 08:47

edu_viccini replied at 2017-6-4 06:24
thanks for the answer!! but i had try the irw, notthing appears.

IR isn't normally recorded.

1 irrecord -n -d /dev/lirc0 ~/lircd.conf

recording ir

2 sudo cp ~/lircd.conf /etc/lirc/lircd.conf
3 sudo /etc/init.d/lirc stop
4 sudo /etc/init.d/lirc start
5 irw
A button of the remote control is pressed.

edu_viccini · Published in 2017-6-4 08:35:50

made this too...

nothing...

nopnop2002 · Published in 2017-6-4 08:41:17

Edited by nopnop2002 at 2017-6-4 08:47

edu_viccini replied at 2017-6-4 08:35
made this too... nothing...

Execute irw & A button of the remote control is pressed.
If nothing , Try irsend

orangepi@orangepipc:~$ irsend LIST "" ""

edu_viccini · Published in 2017-6-4 09:10:20

The irw show nothing. The irsend LIST "" """ show irsend: /root/lircd.conf

nopnop2002 · Published in 2017-6-4 11:26:49

Edited by nopnop2002 at 2017-6-4 12:02

edu_viccini replied at 2017-6-4 09:10
The irw show nothing. The irsend LIST "" """ show irsend: /root/lircd.conf

Check out your device.

$ ls /dev/lirc*
/dev/lirc0 /dev/lircd

My hardware.conf is
orangepi@orangepizero:/etc/lirc$ cat hardware.conf
# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Don't start irexec, even if a good config file seems to exist.
#START_IREXEC=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER="default"
# usually /dev/lirc0 is the correct setting for systems using udev
DEVICE="/dev/lirc0"
MODULES="sunxi_cir"

# Default configuration files for your hardware if any
LIRCD_CONF=""
LIRCMD_CONF=""

edu_viccini · Published in 2017-6-5 09:04:20

Well... mine is it:

and the ls

C:\Users\Arthur\Desktop\hard1.png

nopnop2002 · Published in 2017-6-5 10:28:24

edu_viccini replied at 2017-6-5 09:04
Well... mine is it:

Try to replace hardware.conf & restart lirc services.

[Solved]How to config LIRC?

This thread contains more resources