Archlinux on PI ZERO ?

gino61 · Published in 2016-12-19 05:22:23

I'ts possibile Archlinux image on Orange PI ZERO ? Thank's

Su7jDDp2MC · Published in 2017-2-5 01:34:01

You can try my image.

https://blog.brichacek.net/arch-linux-on-orange-pi-zero/

But there is a problem. It’s not possible to use WiFi and other features specific for H2+ CPU, because of lack right Device Tree Overlays and WiFi drivers. So, if you want to use Orange Pi Zero as small network server, ADS-B receiver or DVB-T IP box, there is no problem.

gino61 · Published in 2017-2-15 05:57:28

Thank's VERY GOOD ,
I do not need wifi, ZERO is used to make a logger PV 123solar ( http://123solar.org/ ) it's Okay.

by

kaiser · Published in 2017-2-21 18:07:30

Su7jDDp2MC replied at 2017-2-5 01:34
You can try my image.

https://blog.brichacek.net/arch-linux-on-orange-pi-zero/

If you don't apply the easily available patches to get Wi-Fi working I fear you also don't implement THS and throttling? Did you check temperatures of H2+ SoC with your image under load? In case you don't care about throttling you should add a warning in big red letters that a good heatsink is mandatory when using your image.

gino61 · Published in 2017-2-24 04:54:03

Edited by gino61 at 2017-2-24 05:10

Which patch ?
I have running with the heatsink for Raspberry , not problem temperature....
The power is 1w , the current on 5V is 210-230mA very good

kaiser · Published in 2017-3-1 02:19:14

Edited by kaiser at 2017-3-1 02:20

gino61 replied at 2017-2-24 04:54
Which patch ?

add_8189fs_v4.3.24_15589.20151023.patch and the many other patches that fix many of issues and provide advanced functionality: https://github.com/igorpecovnik/ ... ch/kernel/sun8i-dev
You can read in post #2 here a little bit about the history of different Linux kernels for H3 boards: https://forum.armbian.com/index. ... mment&comment=10144

mich04 · Published in 2017-5-20 00:39:40

I am also very interested in this to work.

@Su7jDDp2MC
I have only gotten your image to work, but it only works on initial boot. When I reboot the system locks up.

I did try the Arch Linux wiki, but I have had little success with that even using the newest u-boot git.

gino61 · Published in 2017-6-10 02:13:16

Edited by gino61 at 2017-6-10 02:15

This procedure https://wiki.archlinux.org/index.php/Orange_Pi compiling u-boot, the orangepi_one_defconfig should be replaced with orangepi_zero_defconfig
work's but not Ethernet port , on PI ONE is wok ok....
Can anyone try it?

Arslan_munir · Published in 2018-7-3 15:54:40

Edited by Arslan_munir at 2018-7-3 16:06

Does it supports HDMI 3.5" screen?