raspberry pi gpio pins versus gpio pins on the orange pi?

cricket0140

Hey, just thinking of jumping ship to the Orange Pi. And my main concern is that one of my main projects (which I would like to transfer over to the orange pi) uses a lot of external devices. I use a prototyping HAT (this one) and would like to know if it is as easy as just putting it on the pins of the Orange Pi. I also use the raspberry pi camera which i had connected to the CSI port of the raspberry pi. I would like to know if there would be any trouble with connecting the Raspberry Pi camera to the Orange Pi.

Basically I want to know if it's just a matter of swapping everything over from the Raspberry Pi to the Orange Pi (including the SD card) and it will all work. Would be awesome if this was the case.

Thanks

nopnop2002

A library and Tool using BCM2835 library don't work.
For example webiopi.

gpio export command don't work.
So waitForInterrupt/wiringPiISR function don't work.

The following command which works in RPI doesn't work.

1. $ gpio exports
   
2. $ gpio export 8 out
   
3. $ gpio exports
   
4. GPIO Pins exported:
   
5.    8: out  0  none
   
6. 
   
7. $ gpio export 8 in
   
8. $ gpio exports
   
9. GPIO Pins exported:
   
10.    8: in   0  none
    
11. 
    
12. $ gpio edge 8 rising
    
13. $ gpio exports
    
14. GPIO Pins exported:
    
15.    8: in   0  rising
    
16. 
    
17. $ gpio unexport 8

Copy code

Hardware PWM don't work using pwmWrite function and gpio pwm command.

And probably there are many devices which don't work.

TooPrist

Привет