OrangePi 5 plus problem boot from eMMC

MoonTiger

Good day!

I installed the Orangepi5plus_1.0.6_debian_bookworm_desktop_xfce_linux5.10.110.img image on the TF card
From the TF card, you can work normally.

A little later I bought a 256GB eMMC module and delivered it to the board, it was successfully detected as mmcblk1.

I decided to try to transfer the OS, from the TF to the eMMC module
using the firmware program:
$sudo orangepi-config
System>Istall>Boot from eMMC
Once completed, I turned off the device and removed the card.

I try to start and I see only the logo and OrangePI on the whole screen.
Nothing else happens.

Then I tried a few more different variants with the standard utility and the result is the same.

Next, I decided to try the instructions from the guide point 2.5.2
by uploading an image to the eMMC module via dd.

However, the result is the same
I try to start from the eMMC module and I see only the logo and OrangePI inscription on the whole screen.
Nothing else happens.