How to Set Up All USB for Orange Pi PC

xfisi2001

Orange Pi PC
Build Android SDK Source ，only one set usb
How to Set Up All USB

Default;--------------------------------
;---       USB0控制标志
;--------------------------------
[usbc0]
usb_used            = 1
usb_port_type       = 1
usb_detect_type     = 1
usb_id_gpio         =
usb_det_vbus_gpio   =
usb_drv_vbus_gpio   = port: PL02<1><0><default><0>
usb_host_init_state = 1
usb_restrict_gpio   =
usb_restric_flag    = 0
usb_restric_voltage = 3550000
usb_restric_capacity= 5
usb_regulator_io    = "nocare"
usb_regulator_vol   = 0
usb_not_suspend     = 0

;--------------------------------
;---       USB1控制标志
;--------------------------------
[usbc1]
usb_used            = 1
usb_drv_vbus_gpio   = port: PL03<1><0><default><0>
usb_restrict_gpio   =
usb_host_init_state = 1
usb_restric_flag    = 0
usb_regulator_io    = "nocare"
usb_regulator_vol   = 0
usb_not_suspend     = 0

;--------------------------------
;---       USB2控制标志
;--------------------------------
[usbc2]
usb_used            = 0
usb_drv_vbus_gpio   =
usb_restrict_gpio   =
usb_host_init_state = 1
usb_restric_flag    = 0
usb_regulator_io    = "nocare"
usb_regulator_vol   = 0
usb_not_suspend     = 0

;--------------------------------
;---       USB3控制标志
;--------------------------------
[usbc3]
usb_used            = 1
usb_drv_vbus_gpio   =
usb_restrict_gpio   =
usb_host_init_state = 0
usb_restric_flag    = 0
usb_regulator_io    = "nocare"
usb_regulator_vol   = 0
usb_not_suspend     = 0

bucas

Sorry, I've trying to build from Drako H3 SDK because i need to patch kernel to make it work my USB touchscreen eGalax, all is OK but only 1 USB work. The question is, wich file in my SDK (android or lichee) I have to modify? In your post it isn't clear.
Thanks