zairac post at 2016-10-21 05:31:17

Connect a fan in a OPI Plus 2

Hi, I need a picture that tells me how to connect a fan 5v (two cables) in an Orange Pi Plus 2.

Thank you so much

oggstar post at 2016-10-21 06:18:49

Edited by oggstar at 2016-10-21 06:19

the easiest way is to connect it to pin 4 and 6 on the GPIO.
http://orange314.com/images/thumb/c/cf/Opi_gpio.png/500px-Opi_gpio.png
Pin four is the second red pin called"+5v Power" and pin 6 is the blackcalled "ground". Pin numer 1 on the board is the pin next to the small arrow.

zairac post at 2016-10-22 05:02:50

Thank you very much, it works. The fan is noisy, if I put it on the ground + 3.3v is not much, but hardly draws air. And I do not know if it would be detrimental to the fan.
Another option is to check if there is a silent fan
page: [1]
View full version: Connect a fan in a OPI Plus 2