y52 post at 2016-2-14 06:59:07

Will Fedora ARM/F23 run with H3 ?

I was trying to reproduce installation of original images from
http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
toon OPI+ , which was not successful

What steps are necessary to bring the OPI+ with original ARM/F23?

As I understand it, the original Fedora images are built rather for the A20 ( armv7hl ), while OPI+ should be built against H3.


This is the boot partition files structure from original ARM/F23 image:
# mount ${card}${p}1 /mnt/sdc1
# ls -al /mnt/sdc1/
total 179920
dr-xr-xr-x6 root root   4096 Oct 30 03:55 .
drwxr-xr-x 13 root root   4096 Sep42011 ..
-rw-rw-r--1 root root    26051 Oct 30 03:55 boot.cmd
-rw-r--r--1 root root    26051 Oct 30 03:50 boot.cmd.old
-rw-rw-r--1 root root    26123 Oct 30 03:55 boot.scr
-rw-r--r--1 root root    26123 Oct 30 03:50 boot.scr.old
-rw-r--r--1 root root   171925 Oct5 20:01 config-4.2.3-300.fc23.armv7hl
drwxr-xr-x2 root root    20480 Oct 30 03:45 dtb-4.2.3-300.fc23.armv7hl
drwxr-xr-x2 root root   4096 Oct 30 03:54 extlinux
drwxrwxr-x2 root root   4096 Oct 30 03:54 grub
-rw-------1 root root 40557822 Oct 30 03:52 initramfs-0-rescue-
afe50178a2e84c8daa250c0980bfe6f8.img
-rw-------1 root root 38958034 Oct 30 03:49 initramfs-4.2.3-300.fc23.armv7hl.img
-rw-r--r--1 root root   227137 Oct 30 03:53 initrd-plymouth.img
-rw-r--r--1 root root       23 Oct 30 03:50 klist.txt
drwx------2 root root    16384 Oct 30 03:42 lost+found
-rw-------1 root root2879579 Oct5 20:01 System.map-4.2.3-300.fc23.armv7hl
-rw-r--r--1 root root5811840 Oct 30 03:50 uImage
-rw-r--r--1 root root5811840 Oct 30 03:50 uImage-4.2.3-300.fc23.armv7hl
-rw-r--r--1 root root 38958098 Oct 30 03:50 uInitrd
-rw-r--r--1 root root 38958098 Oct 30 03:50 uInitrd-4.2.3-300.fc23.armv7hl
-rwxr-xr-x1 root root5811776 Oct 30 03:53 vmlinuz-0-rescue-afe50178a2e84c8daa250c0980bfe6f8
-rwxr-xr-x1 root root5811776 Oct5 20:01 vmlinuz-4.2.3-300.fc23.armv7hl
-rw-r--r--1 root root      167 Oct5 19:58 .vmlinuz.hmac-4.2.3-300.fc23.armv7hl



y52 post at 2016-2-14 16:53:46

Where could the initial boot loader binaries "boot0" and "u-boot" builds from the H3 SDK could be found?
I understand, that the one furnished with the original FC23 distribution located at
IMG_MOUNT$/usr/share/uboot/Orangepi/u-boot-sunxi-with-spl.bin
is built for A2X and doesn't fit the OPI+.
I was not able to boot my OPI+ with it.
Unfortunately, I don't have a serial terminal to troubleshoot the boot process.

johngotts post at 2016-6-17 04:11:23

If you have made any progress with getting Fedora 23 to work, let me know.

I have Fedora 22 fully working, and I'm willing to buy another 64 GB micro SD card for development purposes.

I'd like to get Fedora 24 working when it comes out and I'd also like to try my luck with CentOS 7.

John

y52 post at 2016-8-20 05:25:49

No. I was not lucky with neither Fedora nor Centos. How did you manage installing F22? Could you share your experience?
page: [1]
View full version: Will Fedora ARM/F23 run with H3 ?